Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Assigning Wave Propagation Vector K in HFSS

Status
Not open for further replies.

bukero

Member level 3
Joined
Aug 24, 2016
Messages
63
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
407
hello
how can i assign a Wave Propagation Vector K in y-direction, the electric field vector in x- direction, and magnetic field vector H in z- direction, using HFSS on radiation box in which my design which i have to analyse is place.
Best Regards;
Bukero

- - - Updated - - -

please help me soon it's urgent
 

hey there,
it seems that u want to excite ur structure with a plane wave.
just add a plane wave excitation and select Ex and ky.
note that if u select EX=1, Ky=1, then Hz=-1/n (when n is the chrectristic impedance, which in air equals to 120*pi).
 

thanks chenfire
but can you pease let me knoe the steps that i have to take in HFSS for doing that
 

sure,

right click -> add excitation -> plane wave.

then a new window will show up, u will be able to select the zero phase place (which is setted to the origin),

then press next and it will show up.

if u got more troubles let me know

if it was helpful u can click "helped me".
 
  • Like
Reactions: bukero

    bukero

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top