hmayna
Newbie level 6
Hi all,
I have this equation of transmission energy between two nodes (SISO transmission).
Pout(d) = Eb*Rb × (4πd)^k/Gt*Gr*(λ^2)*Ml*Nf
where Eb is the mean required energy per bit for ensuring
a given error rate requirement
Rb is the bit rate
d is the transmission distance.
k power loss factor
Gt and Gr are the transmission and reception antenna gain
λ is the carrier wave length,
Ml is the link margin,
Nf is the receiver noise figure.
knowing I have these values of parameters(atteched):
my question is how can I get Eb and Rb ??
I have this equation of transmission energy between two nodes (SISO transmission).
Pout(d) = Eb*Rb × (4πd)^k/Gt*Gr*(λ^2)*Ml*Nf
where Eb is the mean required energy per bit for ensuring
a given error rate requirement
Rb is the bit rate
d is the transmission distance.
k power loss factor
Gt and Gr are the transmission and reception antenna gain
λ is the carrier wave length,
Ml is the link margin,
Nf is the receiver noise figure.
knowing I have these values of parameters(atteched):
my question is how can I get Eb and Rb ??
