Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to convert 1d to 3d object in hfss

Status
Not open for further replies.
P

priyarajan

Junior Member level 3
Joined
Jul 30, 2016
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
234
How to convert !d to 3d object in hfss

To draw a bowtie structure in HFSS i have used "draw line " comment .Can any one tell me how to convert 1D object to 3D object and please tell me how to assign material to that converted 3D object.
 

Re: How to convert !d to 3d object in hfss

First of all use Modeler>Boolean>add command to add all the lines to make it single 1D structure
Then use one of the following depending on your model

1. Modeler> surface>move faces>along normal or along vector
2. Modeler> surface>sweep face along the normal
3 Draw> Sweep>around axis or along vector or along path
Explore help examples about these commands
How to assign material ?
Once 3D model is created just right click the model and assign material tab and then select the material of your choice.
If you do not choose any material then by default it is PEC in HFSS
 

Re: How to convert !d to 3d object in hfss

You can also try to change the 2D objects in to 3d by assigning the thickness of the material....

Modeler>surface> thicken sheet

give the thickness or increment value in desired direction....

then it is converted as 3D object and assign the required material.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top