Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SIM900, SIM800, SIM908 recommendations

Status
Not open for further replies.
C

cpt_babur

Newbie level 5
Joined
Dec 24, 2010
Messages
10
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,283
Location
ISTANBUL
Activity points
1,381
Hi all.

For years. I get the PMs related SIMCOM series.
So i want to give some tip for success.

Most important for you!
1. Make sure your power supply is most suitable for SIMx. (2,5 - 3 A)
2. After power cycle the modem, please don't send anything until you get "Call Ready" or "GPS Ready". THIS IS SO IMPORTANT.
3. Be aware of your modem is powered on or off.
4. Everytime wait for modem response.
5. For GPRS application; always use AT+CIFSR in init stage. Your network attachment not works otherwise.
6. When you develop, everytime use UART spy cable and PC terminal. This is Very very useful.!

:thumbsup::thumbsup::thumbsup:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top