Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Re: Setting an initial condition for VCO simulations in Spec
u can set initial condition inside the inductor or capicator which is making ur resonance circuit model...when u initialize into your schematics.
u can also do this goto Analog Design Environment of Cadence. Select Simulation->Convergence aids->Initial Condition
hopefully i will work
But a single pulse current generator will be trigger for the vco. For instance if you connect a pulse current generator without period and very short pulse after a certain time ( for intance 10ns ) this generator will wake-up the circuit. If you have double crossed vco, you may also use time shifted current pulse generators to wake up the transistors with a time delay.
There are many possibilites to wake up the circuit.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.