Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

regulator LDO 5V/1A problem vout

Status
Not open for further replies.

mmmary

Newbie level 5
Joined
May 25, 2016
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
81
Hello
I want to produce a 5V / 1A for pic16f, I have a transformer 230 / 5V, diode bridge and filter capacitor, in the regulator input, I find the voltage 4.18V with isis I tried with the regulator vin 2.2V / 10V but I did not get a 5V voltage , i get 3.53V is there a solution for 5v .thank you
 

i used the transformer from WURTH ELEKTRONIK ( Transformateur d'isolation with 3 W,vin 85V à 265V,vout 5V) , standard power diodes 1N4007, capacitor2200uF, regulator
from TEXAS INSTRUMENTS LM2940IMP-5.0/NOPB Régulateur LDO , 0V à 26V, 500mV Dropout, 5Vout, 1Aout, SOT-223-3
 

Hi,

5V x 1A give 5W, but your transformer is only 3W.

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top