Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] How to connect between difference power source board?

Status
Not open for further replies.
U

u24c02

Advanced Member level 1
Joined
May 8, 2012
Messages
404
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
4,101
HI.

I'd like to connect between xilinx FPGA (SMPS 5V 2A Adaptor)and small board( USB 3.0 power)
But I want to know that how to connect two boards in the different power source.
Would you please let me know how to resolve in this situation?
 

u24c02 said:
I want to know that how to connect two boards in the different power source
Click to expand...

Whatever the connector you choose, the ground reference must be the first conductor to be connected.
 
  • Like
Reactions: u24c02

    U

    u24c02

    Points: 2
    Helpful Answer Positive Rating
Look at the required logic levels... you may need a level translator, and a separate PSU if you need to generate 3V3 for the USB board.....
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top