Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Computing light level (W)

Status
Not open for further replies.

bilal_oct

Full Member level 1
Joined
Aug 8, 2008
Messages
96
Helped
8
Reputation
16
Reaction score
5
Trophy points
1,288
Activity points
1,950
How to compute the "light level" if there are 135000 photons at a given wavelength ?
 

The question is likely to be not easily answered, particularly if the spectrum is wide.
Most light sensing devices have different responses depending on the wavelenght.
 

Consider BGO Scintillator as source of producing photons. So, if BGO produces 135000 photons then what will be the "light level (W)" ?
 

At this article you can see that it is not a trivial answer, but perhaps should be obtained from experimentations; the typical frequency response of both cyntilators an photodetectors are strongly dependent on not only the material composition, but varies from one manufacturer to another. Furthermore, each spectrum is not represented by simple equations.
 

If the photons are emitted at a single wavelength "L" each of them have energy:

E = h/L, where h is the Planck constant = 6.62exp(-34) J*s

E is in Joule

You know the source generates N photons/s then the power (power=energy/time) will be, simply:

P = N*h/L

However you didn't specify the 135000 photons in which amount of time are generated.
 
  • Like
Reactions: CataM

    CataM

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top