Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ring oscillator with differential outputs

Status
Not open for further replies.
P

pankaj jha

Full Member level 3
Joined
Apr 16, 2010
Messages
170
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Location
jaipur
Activity points
2,457
Hello everyone!

I wish to design a ring oscillator of 250 Hz (without using inductors and capacitors ) with two differential outputs. But the phase difference between the two outputs should be exactly 180 degrees. Also I need the output DC to be 900mV. I am using 1.8V supply voltage.

Can anyone suggest me some paper for the same??
 

250 Hz without capacitors? Means only based on transistor capacitances? 250 MHz would be more realistic, may be a few decades down with very low currents.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top