Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Eagle Clearance error

Status
Not open for further replies.
M

mahbub.hs80

Newbie level 1
Joined
Jan 19, 2016
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
9
I am using an STM32 microcontroller component in my design and getting lots of clearance errors. I am using default eagle DRC file and haven't modified anything in the library.
The library, schematic and brd file is attached. Thanks in advance.
View attachment Test_board.7z
 

Hi,

your spacing between the pads is about 0.2mm. There is nothing obviously wrong with the package.

I assume the DRC setup says it needs more than 0.2mm spacing.
Usually the PCB manufacturers have no problem down to 0.15mm.
So i recommend to adjust the DRC setup.

Go to the PCB manufacturer´s website and look for design rules. Find the values and edit/create a "Manufacturer_name.DRC" file.

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top