Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

adding i.MX233 model into proteus ISIS

Status
Not open for further replies.
P

pragash

Advanced Member level 2
Joined
Jul 4, 2005
Messages
512
Helped
64
Reputation
128
Reaction score
59
Trophy points
1,308
Location
Oakland
Activity points
4,940
Hi there,
I’m looking for proteus ISIS simulation model for i.MX233 processor. Based on website, only IBIS model available. I know that IBIS model cannot be simulated in proteus ISIS.

The objective is to simulate the processor model in proteus ISIS before starting layout.

is there anyway to add this processor to proteus ISIS?

https://www.nxp.com/products/microc...arm9-core:i.MX233?fpsp=1&tab=Design_Tools_Tab

BR
pragash
 

If you are good enough in c++ you can do it by writing a new model for proteus, but you will need labcenter SDK. It is a huge project. If you are in harry with your project you can as our help to provide you a finalised design and prototype.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top