Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SMA Connector types and samples

Status
Not open for further replies.
R

rizwan183

Member level 4
Joined
Feb 15, 2013
Messages
70
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,288
Location
Pakistan
Activity points
1,817
I am looking for SMA connector with center pin mounting using surface mount and other four pins are through hole. Are there such connectors available? if so any sample or any alternate way to achieve so? Thank You
 

Dear thanks for the response. I don't understand the SMA. I want to mount SMA on PCB. I can't use edge laung Smas. What I want to do is like shown in the picture something like that if possible. Capture.JPG
On the other side is a ground plane to which ground pins are connected. is that possible? What about the performance and other things?
 

Not clear which connector mount is meaned with this picture.

As far as I understand, you have been initially asking for a straight PCB jack with SMT center pin and through-plated ground. The type is available from various manufacturers, e.g. https://www.amphenolrf.com/132134-15.html
 
rizwan183 said:
I am looking for SMA connector with center pin mounting using surface mount and other four pins are through hole.
Click to expand...

It might be difficult to properly solder the center conductor in prototyping.
 

It might be difficult to properly solder the center conductor in prototyping.
Click to expand...
Should work with solder paste and hot air.
 

Thanks alot guys. That's exactly what i am looking for FvM.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top