Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] How to set/read internal RTC of Sim 908 module?

Status
Not open for further replies.
sreepss

sreepss

Full Member level 4
Joined
Jun 10, 2009
Messages
204
Helped
29
Reputation
60
Reaction score
27
Trophy points
1,308
Location
Cochin, Kerala, India
Activity points
2,376
Hi all,
I am working on a project that using SIM908,module on the board. I have a doubt that how could I set /read the internal real time clock of the module? I have searched for a AT command but nothing was referred on the data sheet..
 

is this what you are referring?
AT+CLTS commnd for reading time.
 
  • Like
Reactions: sreepss

    sreepss

    sreepss

    Points: 2
    Helpful Answer Positive Rating
Hi all thanks for replaying, my issue was solved . I have use the AT Command AT+CCLK which we can use for updating and configure the time.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top