Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

connecting signal ground (5v smps 0v) to earth ground

Status
Not open for further replies.
R

raman00084

Full Member level 6
Joined
Nov 29, 2010
Messages
362
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
4,006
connecting signal grund(5v smps 0v) to earth ground

can i connect directely signal grund(5v smps 0v) to earth ground are i can use a resistor are capacitor if so kindly tel the value of the passive component.


regards
kalyan
 

Re: connecting signal grund(5v smps 0v) to earth ground

Hi,

As long as there is no other connection you can add a resistor or capacitor to earth ground.

Why do you want the connection? --> Then one can decide what values to use.

Be careful when working with dangerous mains voltage.
Especially take car when you use a removable connection to earth ground.
Maybe you have to use special safety devices, like X2 capacitors.
You have to comply with safety regulations of your country.

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top