Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[PIC] RFID RC522 with PIC18f4550

Status
Not open for further replies.

itlok

Newbie level 4
Joined
Aug 29, 2015
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
44
Hello guys, I'm trying to find how to use the RC522 module and pic18f4550 together, any idea how this can be done? I've search the net but with no luck.. :cry: help will be much appreciated! Thanks!
 

Hi,

GND and VCC should be clear.
MOSI, MISO, SCL also.
CE0 is the chip select for the SPI interface. Connect it to a PIC output port.
RST is the reset pin. If you need the reset function then connect it to a PIC output port.
INT is the interrup out of RC522. If you need it connect it to a PIC interrupt input port.

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top