Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Protocol designing for power Line Communication.

Status
Not open for further replies.
S

ss

Newbie level 6
Joined
Mar 14, 2005
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,384
power line communication middle voltage

Hi
Can any one plz tell me about the Protocol designing for power Line Communication.
the purpose of the project where these protocols are require is to communicate the PC using existing power line

Waiting for positive reply

Bye
 

try this link:http:
 

There is no such a thing like protocol or standard for communication over power lines.
People try to use power lines with or without success.
What you need to connect 2 PC are power lines modems.
Examples here:
http://www.hth.com/plm-24/plm-24.htm
**broken link removed**
Or if you wish to create your own modems have a look at this:
**broken link removed**

Added after 52 minutes:

Another option comes from Microchip:
**broken link removed**
 

PLC is well known in European country. There are two catagory for Middle voltage and low voltage.

Another patent is coming using skin-effect technique.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top