Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ansoft HFSS port problem

Status
Not open for further replies.
G

gannam123

Newbie level 1
Joined
Jul 19, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
11
hi
m working on patch antenna design, but I can't define port to patch antenna. I have problem while defining a port to patch antenna. can anybody help me solve this problem
 

gannam123 said:
hi
m working on patch antenna design, but I can't define port to patch antenna. I have problem while defining a port to patch antenna. can anybody help me solve this problem
Click to expand...

- The 1st selection: You can use Lump Port when using Transmission line (the port is drawn inside the substrate)
- The 2nd selection: You can use Wave port for feeding by coaxial.
Remember Wave port for things that outside the struct and Lump Port for things inside the struct
 

In HFSS: Notice under the file tab there is a section "Open examples" .... four items down.

Azulykit
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top