Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Dummy sizes for matching

Status
Not open for further replies.
R

ripoo82

Junior Member level 2
Joined
Sep 18, 2012
Messages
22
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,425
Is there any rule of thumb for the dummy size in a highly matched MOS array?

From what size you start reducing the dummy size, or is it better to always full size dummies?
 

I've learnt it is important to keep the "environment" as uniformly as possible, i.e. spacings and layers, particularly the poly. So it is enough to have dummies with the same spacing and the same longer side (usually the width), but they don't need to have the dimension of the shorter side (length, then); min. dimension is enough.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top