Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ADC Value Fluctuating in PIC Voltmeter and Ammeter LCD PIC16F877A

Status
Not open for further replies.
M

musovern

Newbie level 1
Joined
Jun 6, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
8
Hi.
I have just joined this forum looks like a great place.


I have just made this Volt ammeter with the 16F877A.


I am came across the post about ADC Value Fluctuating in PIC Voltmeter and Ammeter LCD PIC16F877A which I have the same problem.

From what i have been reading it's been solved.

I'm just not to sure what "There was wiring mistake and common grounding was missing" ?

Is there anyone could help me with this

Kind regards

Vernon
 

The most common reason for the PIC ADC fluctuating is that the voltage reference has been tied to the supply rail and you have noise on the supply rail. A large capacitor on the decoupled VREF should cure. Another cause could be that the input voltage is at to high an impedance (should be less than 10K or that the input voltage is noisy.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top