Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how solve short circuit problem and dip of igbt gate voltage

Status
Not open for further replies.
M

Maloth Ramesh

Junior Member level 2
Joined
May 31, 2015
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
170
i have problem while simulating the pspice model of ir2136 and based inverter with sine-pwm technique with 20khz switching frequency first one is control circuit second one is power circuit Capture.PNGCapture1.PNG
my problem is source voltage is short circuiting for a duration around 1micro second
the gate voltage is continually deceasing.
igbt type fgh40n60smd, snubber circuit diode is rhrp30120, zenor diode is 1n4744,
and the voltage across the ITRIP terminal is increasing within 500micro seconds of operation


thank you,
 

source voltage is short circuiting
Click to expand...
means exactly what?

You have unsuitably low impedance snubbers, I think. It's also not clear if the deadtime generated by the IR2136 internally (provided it's correctly modelled) is sufficient. You may want to add deadtime in your pwm generator.

Regarding overcurrent detection, I don't see "return_gnd" connected to the control circuit.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top