Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Use a result from the previous time step at next time step. ADS transient simulation

Status
Not open for further replies.

junsik

Junior Member level 2
Joined
Feb 17, 2015
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
207
Hi im junsik.
I want to model arc resistance in the ADS simulation.
For that, I have to integrate the current from zero to at that time step.

As a result, I want to how use the result (current) from last time step in the next time step.
Is it possible to use the real time result during transient simulation??

Thank you.
 

Not in the same simulation, I think. Integration needs a measurement statement, and
computing the measurement results is based on postprocessing output.
So you can use the measurement result only in a following simulation, but probably in the same control file using the .alter command.
 
  • Like
Reactions: junsik

    junsik

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top