Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Slewrate and -3db Bandwith specification for Active CMOS RCFilter based on OTA?

Status
Not open for further replies.
S

sudeep_

Member level 1
Joined
Jul 31, 2013
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
261
How to get required Slewrate and 3db Bandwith for Active CMOS RCFilter based on OTA?

HI,

How to meet the required Slewrate anad Bandwidth in 1st order Low pass filter based on signled ended output OTA.
If I set the high SR. -3dB BW is showing high.
If I keep the LPF OTA at my required -3dB bandwidth, the SR is dropped (the Feedback capcitor charge and discharge is slow).

Can anyone suggest me how to tradeoff bewteen the SR and BW in 1st order LPF OTA?

Thanks!!
 

In a 2-stage OTA you can decouple bandwidth and slewrate effectively by Miller compensation (pole-splitting): bandwidth is (mainly) defined by the 1st stage, whereas the 2nd stage may define your slew rate.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top