Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Sim908: Tcp closed... Connect fail

Status
Not open for further replies.

bouvett2

Newbie level 5
Joined
May 9, 2012
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,355
Hi Guys,

I am a newbie to the SIM908 module so please be patient with me.

I would like to create an IP connection with a PC server which I created with "Socket test".

I read much of the AT command manual, and I got this code working:

Code:
AT+CIPSHUT
AT+CIPMUX=0
AT+CIPSTATUS					
AT+CSTT="internet","",""			
AT+CIPSTATUS
AT+CIICR					
AT+CIPSTATUS
AT+CIFSR					
AT+CIPSTATUS			
AT+CIPSTART="TCP","213.165.160.134","2000"	
AT+CIPSEND=30

I am sending the data via UART through a serial port monitor. The log of the data is pasted below:

Code:
[28/04/2015 15:21:59] - Written data

41 54 2b 43 49 50 53 48 55 54 0d 0a             	AT+CIPSHUT..

[28/04/2015 15:21:59] - Read data

41 54 2b 43 49 50 53 48 55 54 0d 0a 0d 0a 53 48 	AT+CIPSHUT....SH
55 54 20 4f 4b 0d 0a                            	                UT OK..

[28/04/2015 15:22:07] - Written data

41 54 2b 43 49 50 4d 55 58 3d 30 0d 0a          	AT+CIPMUX=0..

[28/04/2015 15:22:07] - Read data

41 54 2b 43 49 50 4d 55 58 3d 30 0d 0a 0d 0a 4f 	AT+CIPMUX=0....O
4b 0d 0a                                        	K..

[28/04/2015 15:25:17] - Written data

41 54 2b 43 49 50 53 54 41 54 55 53 0d 0a       	AT+CIPSTATUS..

[28/04/2015 15:25:17] - Read data

41 54 2b 43 49 50 53 54 41 54 55 53 0d 0a 0d 0a 	AT+CIPSTATUS....
4f 4b 0d 0a 0d 0a 53 54 41 54 45 3a 20 49 50 20 	OK....STATE: IP 
49 4e 49 54 49 41 4c 0d 0a                      	        INITIAL..

[28/04/2015 15:27:24] - Written data

41 54 2b 43 53 54 54 3d 22 69 6e 74 65 72 6e 65 	AT+CSTT="interne
74 22 2c 22 22 2c 22 22 0d 0a                   	        t","",""..

[28/04/2015 15:27:24] - Read data

41 54 2b 43 53 54 54 3d 22 69 6e 74 65 72 6e 65 	AT+CSTT="interne
74 22 2c 22 22 2c 22 22 0d 0a 0d 0a 4f 4b 0d 0a 	t","",""....OK..

[28/04/2015 15:28:34] - Written data

41 54 2b 43 49 50 53 54 41 54 55 53 0d 0a       	AT+CIPSTATUS..

[28/04/2015 15:28:34] - Read data

41 54 2b 43 49 50 53 54 41 54 55 53 0d 0a 0d 0a 	AT+CIPSTATUS....
4f 4b 0d 0a 0d 0a 53 54 41 54 45 3a 20 49 50 20 	OK....STATE: IP 
53 54 41 52 54 0d 0a                            	        START..

[28/04/2015 15:30:06] - Written data

41 54 2b 43 49 49 43 52 0d 0a                   	AT+CIICR..

[28/04/2015 15:30:07] - Read data

41 54 2b 43 49 49 43 52 0d 0a 0d 0a 4f 4b 0d 0a 	AT+CIICR....OK..

[28/04/2015 15:31:16] - Written data

41 54 2b 43 49 50 53 54 41 54 55 53 0d 0a       	AT+CIPSTATUS..

[28/04/2015 15:31:16] - Read data

41 54 2b 43 49 50 53 54 41 54 55 53 0d 0a 0d 0a 	AT+CIPSTATUS....
4f 4b 0d 0a 0d 0a 53 54 41 54 45 3a 20 49 50 20 	OK....STATE: IP 
47 50 52 53 41 43 54 0d 0a                      	        GPRSACT..

[28/04/2015 15:31:32] - Written data

41 54 2b 43 49 46 53 52 0d 0a                   	AT+CIFSR..

[28/04/2015 15:31:32] - Read data

41 54 2b 43 49 46 53 52 0d 0a 0d 0a 31 30 39 2e 	AT+CIFSR....109.
32 30 30 2e 34 37 2e 38 38 0d 0a                	        200.47.88..

[28/04/2015 15:33:21] - Written data

41 54 2b 43 49 50 53 54 41 54 55 53 0d 0a       	AT+CIPSTATUS..

[28/04/2015 15:33:21] - Read data

41 54 2b 43 49 50 53 54 41 54 55 53 0d 0a 0d 0a 	AT+CIPSTATUS....
4f 4b 0d 0a 0d 0a 53 54 41 54 45 3a 20 49 50 20 	OK....STATE: IP 
53 54 41 54 55 53 0d 0a                         	        STATUS..

[28/04/2015 15:34:52] - Written data

41 54 2b 43 49 50 53 54 41 52 54 3d 22 54 43 50 	AT+CIPSTART="TCP
22 2c 22 32 31 33 2e 31 36 35 2e 31 36 30 2e 31 	","213.165.160.1
33 34 22 2c 22 32 30 30 30 22 0d 0a             	        34","2000"..

[28/04/2015 15:34:52] - Read data

41 54 2b 43 49 50 53 54 41 52 54 3d 22 54 43 50 	AT+CIPSTART="TCP
22 2c 22 32 31 33 2e 31 36 35 2e 31 36 30 2e 31 	","213.165.160.1
33 34 22 2c 22 32 30 30 30 22 0d 0a 0d 0a 4f 4b 	34","2000"....OK
0d 0a 0d 0a 53 54 41 54 45 3a 20 54 43 50 20 43 	....STATE: TCP C
4c 4f 53 45 44 0d 0a 0d 0a 43 4f 4e 4e 45 43 54 	LOSED....CONNECT
20 46 41 49 4c 0d 0a                            	        FAIL..

As you can see, the TCP connection was not successful. I have verified the APN and the IP.

Can anyone suggest what might be the reason why the state is consistently as TCP CLOSED?

Thanks for your time.

regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top