Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

tlp250 driver interface with IRFZ44N showing input current is outside specified range

Status
Not open for further replies.

nur.aiub

Newbie level 3
Joined
Sep 3, 2014
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
17
in my inverter ckt i m getting input current is outside specified range error.here i used tlp250&IRFZ44N t 2.jpg
 

It will help if you paste your schematic from were this error or warning comes from :)
 

1.jpg
this is my schematic please help me how can i solve this problem..
 

the output current limit from the TLP250 to is (1.5A)..May be that limit is being violated.. U hav not used any resistance before the gate..Try putting some current limitting resistance(15-20ohm) between the output of TLP250 and the gate of the switches...
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top