Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

placement of multi height cells in physical design

Status
Not open for further replies.
J

jigs047

Junior Member level 1
Joined
Apr 8, 2013
Messages
17
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Ahmedabad, India, India
Activity points
1,367
what are the precautions/guidelines to place the multi cell row height cells while doing placement optimization ??
 

Most of the tools are able to analyze the multi-height cells. it is now treated as any other cell. Both synopsys and cadence tools handle multi height cells without much user input. Once you have the cells in the netlist....it is used any other cell.
 

artmalik said:
Most of the tools are able to analyze the multi-height cells. it is now treated as any other cell. Both synopsys and cadence tools handle multi height cells without much user input. Once you have the cells in the netlist....it is used any other cell.
Click to expand...

and if cell height is not integer multiple of your row height then you need to create separate row.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top