Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[moved] hyperthermia applicator (antenna, cst)

Status
Not open for further replies.
A

ashishkodape007

Newbie level 2
Joined
Feb 4, 2015
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
12
I had made a double coaxial slot antenna at 915 MHz in CST microwave studio, the problem is with the feed as it is a cylindrical antenna the problem is with the feed. I had given it waveguide feed but the results are not coming appropriate.how to the cylinderical antenna feed and where should be the ground plane.there is a tip at the bottom of the cylinder
 

i had made a coaxial double slot antenna and had feed it with waveguide port, i want a power output of 10 watt at tip of the antenna.can somebody tell me the procedure for discrete port to this type of antenna
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top