Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] [moved] Open drain and Open Collector

Status
Not open for further replies.

vinoth14

Junior Member level 1
Joined
Feb 27, 2015
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
184
Hi,

Can anyone explain about the term Open drain and Open Collector in electronics.
 

As we know FETs have three terminals: source, gate and drain.
Open source means that the source terminal is floating: it is no connected to either the GND or the VDD of the power supply. In this case you must use a pull up or pull down resistor depending on the connection.
Open drain means that the drain is floating. You must use a pull up or pull down resistor depending on your connection.

Integrated Circuits may be addressed as open drain or open source, it simply refers to the output FET used in the IC.

- - - Updated - - -

en.m.wikipedia.org/wiki/Open_collector
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top