Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

query regarding two stage telescopic amplifier

Status
Not open for further replies.

nisha gupta

Member level 4
Joined
May 22, 2012
Messages
71
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Hyderabad, Andhra Pradesh, India
Activity points
1,755
i m designing transimpedance amplifier... for high gain i have chosen telescopic structure. i have designed two stage cascode telescopic amplifier. it is working fine in open loop with common mode feedback. ac gain and traient both response are fine. but as i connecting RC feedback transient response in not correct. i m attaching images also... plz let me know what could be the problem in design
 

i m designing transimpedance amplifier... for high gain i have chosen telescopic structure. i have designed two stage cascode telescopic amplifier. it is working fine in open loop with common mode feedback. ac gain and traient both response are fine. but as i connecting RC feedback transient response in not correct. i m attaching images also... plz let me know what could be the problem in design
 

Attachments

  • tele2stage.png
    tele2stage.png
    121.1 KB · Views: 108
  • acgain and transient.png
    acgain and transient.png
    37.7 KB · Views: 105
  • closed loop acgain and transient.png
    closed loop acgain and transient.png
    30.9 KB · Views: 128

What is the value of the R used in the feedback? What is the feedback you are using? Can you show the circuit?
 

Which nodes are the RC feedback connected to?

3k seems a small value. How is it compared to the output impedance of the Op-Amp? How much current is the R drawing? Can the Op-Amp support it?
 

Hi nisha,

output impedance of 2nd stage is around 1K and current in 2nd stage is 2.47mA in each lag

Is that value with the feedback in place or in open loop? What is it in open loop?

I feel that the RC is shunting the output impedance of the Op-Amp and hence reducing your gain. The R you use has to be selected in accordance to the output impedance of your Op-Amp. Try with some massive R and appropriate value of C and see whether you get the intended result.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top