Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Miniature solenoid valve control using DC signal

Status
Not open for further replies.
R

Rajashri.Shevale

Junior Member level 2
Joined
Dec 31, 2014
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
India
Activity points
164
hello,
i am trying to design a circuit in which i needed a micro solenoid valve which have forward motion controlled by electrical signal and backward motion controlled manually. i needed this type of solenoid of size around 1*1 cm to 1.5*1.5 cm. please suggest me , if anybody know any....
 

Solenoid valves should be characterized by medium (e.g. water, air, etc.), pressure, flow rate respectively orifice size, operation voltage, mode of operation (generally normally closed, normally open, special types like proportional valve).

Having this information, you might check if the intended size is feasible.
 

FvM said:
Solenoid valves should be characterized by medium (e.g. water, air, etc.), pressure, flow rate respectively orifice size, operation voltage, mode of operation (generally normally closed, normally open, special types like proportional valve).

Having this information, you might check if the intended size is feasible.
Click to expand...

Actually i want solenoid valve with plunger ; which pushes a key mounted on its top , when it receives signal from controller . and I am using this in my wrist watch, that's why I am going to search such a small solenoid
 

So you're asking for a solenoid magnet rather than a solenoid valve.

Parameters are force and travel.
 

Yes I want that type of device in miniature size which can fit in my watch. still I am not getting any ..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top