Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Car Fuel Guage Working

Status
Not open for further replies.

Surendhar M

Banned
Joined
Jan 10, 2013
Messages
110
Helped
15
Reputation
200
Reaction score
100
Trophy points
1,323
Location
Chennai
Activity points
0
Hi,

First of all don't know where to post it,

I need to know how exactly the fuel guage in car is working. Whether voltage or current will be available at the dash board for the measurement? I'm planning to measure it (from the dash board) and connect to microcontroller.
 

I need to know how exactly the fuel gauge in car is working. Whether voltage or current will be available at the dash board for the measurement?
It kind of depends on what car is under consideration.Every manufacturer will use their own system for measuring fuel level in the tank(s).The connection from the sensor to the system,which will calibrate the value to be seen by the driver,will be the part of a bus which will feed information to the driver on the dashboard.
Anyway,for your reference,here is a diagram showing the connections.**broken link removed**
 

Thanks for the reply but I Couldn't able to open your attachment
 
  • Like
Reactions: Dont

    Dont

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top