Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Connet ADC output to UART Transmitter and display at hyperterminal(FPGA Verilog)

Status
Not open for further replies.
D

darklumi92

Newbie level 1
Joined
Jan 26, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
9
Hello everyone, right now i have the ADC module (12-bits) which i convert it to BCD and then ASCII number since hyperterminal understand ASCII code. For UART TX module, i use the one in https://www.fpga4fun.com/SerialInterface.html and it works but hyperterminal output multiple times like this https://i.imgur.com/0hNdz7v.jpg. I believe some control logic is required here. Anyone can provide idea of "control module" connecting ADC output to UART TX input so i can display the ADC in hyperterminal??
 

An output line must be terminated with carriage return + linefeed. (0x13 + 0x10).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top