Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to perform power handling analysis with Ansys HFSS

Status
Not open for further replies.
P

Paolo Squadrito

Newbie level 2
Joined
Jul 31, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
11
Hi everyone, I'm a microwave enthusiast and a telecommunications student.
Does someone know how to perform power handling test on an elettromagnetic structure in HFSS?
 

Hi Paolo Squadrito,

I'm a microwave student and definitely not a telecommunications enthusiast, so I'm not sure what a "power handling test" is - can you describe this?
 
  • Like
Reactions: zohre

    Z

    zohre

    Points: 2
    Helpful Answer Positive Rating
Hi Paolo,
to perform power handling test on an eletromagnetic structure in HFSS, you must define the value of your power in the port1, then show the field distribution on structure, as you know the maximum electric field shows in V/m. you must khnow the breakdown voltage of each materials you used in your structure. for example, if you used teflon as a dielectric, please sure the breakdown voltage of teflon is more than the obtained value in HFSS. also for air gaps.Actually the voltage breakdown is influenced by the geometry and the dielectric strength.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top