Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

problems on gerber file in orcad16.0

Status
Not open for further replies.
P

pary

Newbie level 1
Joined
Jan 22, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
8
Respected sir/mam i am using orcad16.0 and i have problem in creating Gerber file. when i create Gerber file then all file what i required-top, Ast,smt,drd,gtdand .tap all file created but only .Gerber file for sst layer(silkscreen top) is not created sir please give me the solution foe the same
thank,s
 

go to option menu ---> post processing then spreadsheet will pop up as shown in attached image make sure enable for post processing option is selected for the *sst layer





enable_for post_processing.jpg
 

And if you find that it is selected (Enable Post Processing is checked), make sure that what you want on the silkscreen is actually on the correct layer, Silk Screen Top or SST.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top