Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem of DRC error in Ares Proteus (have project file)

Status
Not open for further replies.
**broken link removed**
you don't mention the error type look above link
 

    M

    Mauya

    Points: 2
    Helpful Answer Positive Rating
I don't know what your mean, i got a DRC error when I connect pin 31 with pin 40 and i can't find reason of it, see my project file, plz help me,
 

DRC error means Design Rule check related error sorry but I am using protues 8 but I think power pins nets are by default is VCC/VDD so you need to change the net name which you using for pin 31 which is #00025 so change the net name of your pin 40 to #00025 that solve your problem.

To change name you can go in schematic and click controller go in properties and click on hidden pins you see there pin 40 named as VCC changed it to #00025 then no error would be their.
 
It's my Screenshot of circuit, please tell me how to fix this error
Mycircuit.png
 

drc.jpg
do change in your .DSN file design file see the image
 
creat new net class.jpg
you can do by changing the net class in power rail configuration as shown in attached image

Other way is to do name your 7805 output pin 3 as power rail VCC so no need to change the power rail net class do any of this will solve your problem :)
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top