Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Scrolling display with LED matrix

Status
Not open for further replies.
A

aandavan

Advanced Member level 4
Joined
Aug 31, 2006
Messages
104
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,298
Location
india
Activity points
1,918
Hi,
I have designed a 8 digit LED scrolling matrix display (8x8 LED matrix display). But my led glowing intensity is low. Suggest me some solutions for this.
 

If you are the led using common emitter , reduce the resister value..

Post your schematic..
 

If you are scanning through columns then the higher the columns the lower the light intensity. But if you are scanning through rows then increase the time for scanning each rows. Upload your schematics if not software Fault
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top