Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Simulation problem WITH PORTEUS

Status
Not open for further replies.
S

SABRAMANSOUR

Junior Member level 2
Joined
Dec 16, 2014
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
127
PLEASE HELP ME
THE MOTOR DOESN'T MOVING WHYYYYY :???: :???: :bang: :bang: :bang:
Sans titre.pngView attachment 1.mcppi_callertable.txt
 

The gray squares at the pins of PORTB, C, D, E show that the port pins are not configured as digital output pins. Set TRISx for these ports properly. Also disable ADC or other multiplexed functions on these ports.
 
what about the quartz I have a problem with it too

- - - Updated - - -

thank u you helped me
but I have the same problem with the quarts
 

Are you testing in breadboard ? What problem you have with quartz ? Which Compiler are you using ? Zip and post the complete project files and Proteus file.
 

You have attached only the .mcppi file of mikroC PRO PIC and it is of no use to me. I need the .c file. So, zip and post the complete mikroC Project files.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top