Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

GSM module - cant get signal

Status
Not open for further replies.
A

Aswinth Raj

Newbie level 4
Joined
Dec 8, 2014
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
coimbatore,tamil nadu,india
Activity points
64
when i connect my module to power the power led stay on but i cant get signal led blinking. If i am suppose to change the baud rate how am i suppose to do it. I am connecting it to my pc via serial port and using putty software.
Thank you!!
 

Hi kindly mention you GSM module,
every module has its own at commands for example simcom modem baud rate set command is like this ""AT+IPR=19200"
 

when i connect my module to power the power led stay on but i cant get signal led blinking.
Click to expand...

If signal led is not blinking then your sim is not in network or less signal and before change baud rate check your GSM module and try with the other sim card.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top