Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Why we used Power factor

Status
Not open for further replies.

sani123

Junior Member level 1
Joined
Jun 7, 2010
Messages
15
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Location
pakistan
Activity points
1,360
why we used power factor ....
what are the advantages of power factor?/
Difference between power factor and transformer...
 

1. Power factor = (real power)/(apparent power)
2. No advantage of power factor.
3 Transformer is a physical device while power factor is a mathematical ratio!
 

When voltage and current are not in in-phase the power is not just product of RMS voltage and current.
The power factor is used to find the real power taken by the load from the well know apparent power.

Transformer is a also a reactive load which cant consume its all apparent power.
 
Power factor is VERY important when generating on the national grid. If the power factor is not very close to unity (real power high, reactive power low), the generators go unstable and can not control their output voltage. So all big devices connected to the national grid have a specification to keep their power factor better then .8. Also if you are running a factory with a bad power factor, you have to deal with currents much larger then required, so the gauge of the wire and size of switchgear has to be greater.
Frank
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top