Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[ARM] interfacing glcd 128x64 with lpc2148

Status
Not open for further replies.
J

joel george

Junior Member level 1
Joined
Aug 11, 2014
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
114
hiiii
i am finding it difficult to interface glcd 128x64 with lpc2148....escpecially i am not aware about the value of pull up registers to be used along the pins of glcd with lpc2148..
cud sumone help me wid the interfacg??does anyone have the diagram to interface??plssss
 

This covers nearly everything you need to know and what tasks you should do to get the GLCD interfaced properly.
**broken link removed**
 

udayan92 said:
This covers nearly everything you need to know and what tasks you should do to get the GLCD interfaced properly.
**broken link removed**
Click to expand...

But sir it doesnt specify the register values dat i need to connect ..the trim pot values nor the voltage supply
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top