Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how is a charge-only usb cable different?

Status
Not open for further replies.
buenos

buenos

Advanced Member level 3
Joined
Oct 24, 2005
Messages
960
Helped
40
Reputation
82
Reaction score
24
Trophy points
1,298
Location
Florida, USA
Activity points
9,116
how is a charge-only usb cable different than a usb data cable?
I have a usb charger, and when I connect a data cable between my Samsung galaxy s3 phone and the charger the battery charge current is about 20mA. When I connect a charge-only cable then the charge current goes up to 400mA.
Now I made an adapter to short the data pins on the phone side, but all it does is it makes the phone to display "Charging(AC)", but the current does not go up with the data cable.
Is the ID pin or the shield connected differently?
Pinouts.ru does not say anything about what exactly is needed to be connected to the ID pin and the shield.
 

"charge only" cables do not need the two data wires, only the two power wires but they may have resistors at the powered end to program the USB source to set the correct current.

Brian.
 

Samsung mains chargers have D+ and D- pins shorted together. That way the phone distinguishes between USB connection and charger connection.
I have Galaxy S Plus and Galaxy Core phones and both are reporting AC charging when connected to AC charger, or one that I made for my car with D+ and D- pins shorted.

So, it is not a special Charge only cable. It is an ordinary USB cable.
 

what is the required connection on the ID pin?
 

the ID pin on the microusb side, that plugs into the phone.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top