Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Debugging program on Atmel AT40008 in ADS 1.2

Status
Not open for further replies.
N

nust10

Junior Member level 1
Joined
Apr 7, 2002
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
13
about arm

When using ADS1.2 to debug program. The program in memory is be overlapped duing ececuting progress.

The chip is atmel's at40008, RO BASE is 0x0000, and RM is automatically set by ADS . I only use at40008's inner memory without outer memory. The startup file is from atmel, and I don't modify it.


Thanks
 

about arm

If at40008 isn't remapped, the address 0x0000 is read-only.
The startup file for ICE and flash is different.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top