Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Circuit from Image to SPICE

Status
Not open for further replies.
P

purifier

Full Member level 4
Joined
Nov 30, 2004
Messages
220
Helped
9
Reputation
18
Reaction score
8
Trophy points
1,298
Activity points
2,570
I've recently downloaded a big circuit from this site.. It is in jpg format.. Is there any way i could convert this image file into a spice circuit file...without having to draw the whole circuit again? In simple words, i have a circuit in an image file... is there any way i could use this for simulation?
 

You must process the image, for extract nodes and get figures. Finally, you must generate a netlist, after to identify each component figure with its subckt (it seems like a database linking). According these assumptions, I would rather make the schematic or netlist by myself.
 

purifier, is *impossible*. Right now there is technology of OCR only. What do you want has not yet invented.

Here is what you do. Print circuit in large paper and manually contruct it in Spice schematics.
 

Thank youvery much...i thought some utility must have existed... anyway, thanks a lot for the answers... One last query... i use MultiSim 7... I've drawn a schematic.. but how can i get a list of all components required in the schematic along with their values... The bill option gives me only the list but not the component values...any suggestions?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top