Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

lumped port for different structure

Status
Not open for further replies.
O

orcid

Newbie level 4
Joined
Dec 15, 2012
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,318
Hi,
How can I define lumped port for cylindrical, triangular or other self-made structures?
Is it wrong to define rectangular shape for lumped port in such these structures?
Thanks
 

Using lumped ports is the easiest way to define excitation in HFSS. Just create a rectangle at the feeding gap and then assign a lumped port on it.
 

Thanks streamlet
I guessed lumped port shape is dependent to structure; but you are right.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top