Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[PIC] Should I take these courses in PIC24?

Status
Not open for further replies.
the best way to learn to program is to write code

as well as reading BigDog's recommended books get a development board such as Microchip's microstick
https://www.microchip.com/Developmenttools/ProductDetails.aspx?PartNO=DM330013

it comes with an onbaord programmer and a header to connect to a breadboard where you can build your own circuits, e.g. switches, LEDs, motors, etc
it also has the facility to connect a FDTI TTL to USB device
https://www.ftdichip.com/Products/Cables/USBTTLSerial.htm
so you can transmit data using a UART to a PC
 
Hello!

Thanks for the inputs. As hardware: I have a Mikromedia PIC24EP board. I think the books from Mr. Lucio Di Jasio are good source!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top