Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Cost of 2 layer PCB vs 4 cost of layer PCB (10W Switch Mode LED driver board)

Status
Not open for further replies.
T

treez

Guest
Hello.
What would be the cost difference of the above?....4 layer with all through-board vias. (no blind or buried vias)
Twice as much cost for 4 layer PCB?..Roughly?
 

2 layer is very cheap. I pay $12.00 for 10cm x 10cm x 10 boards PTH 1.6 green HASL top and bottom silk screen, 5 days $9.00 postage
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
2 layer is cheaper. i have paid 1USD for this size 10cm X 8 cm
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
is 4 layer twice as much cost as 2 layer, or less than twice as much?
 

yes 4 layer price is almost double than 2 layer pcb
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
there is big difference between 4 layers and double layer,
because double layer is common, and widely used,
4 layers will be around twice the cost of double layer
 

Your all talking about the "price" you pay for the board.

The cost in not having a 4 layer as opposed to a 2 layer can be something entirely different (depending on the circuit design & layout) :p
 

Dear Treez,

Generally, 2 layers PCB without complicated graphic and normal trace width and via diameter,
the price will be very cheap. Like 90USD/square meter.
And 4 layers is not totally twice as 2 layers.
But the premise should be the design it within fabricator's capability.
If not, the price will be much higher, all depends on the design.

Leo Chou
 
Last edited by a moderator:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top