Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

gsm modem resetting issue

Status
Not open for further replies.
S

sneha.tm

Newbie level 6
Joined
Jul 15, 2014
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
65
Hi all,
My GSM Modem sim900 module resetting automatically and sending commands RDY

+CFUN: 1

+CPIN: READY.It happens after sending AT+CIFSR command.Please help me to fix this error.
 

When posting a question like this you should provide a lot more information i.e.

1. Is this an existing design (product) or you own design.
2. If it is your own design then post the circuit.
3. Also indicate how you are powering the SIM900.

With the above information, helping you would be a lot easier otherwise it is just a guess.

And my guess would be it is a power supply issue.

Cheers.
 

only issuing after this AT+CIFSR "AT" command or at frequent interval or issuing any other "AT" commands. Test using "ATD+" command and test whether it correctly dial and connect with others and don't resetting the Module. If it resetting, it could be power supply problem. are you using LDO with the capability of supplying 2A current and 1000uF/2200uF, 0.1uF, 100uF caps connected at Vdd of GSM Module (if it is your own circuit).

pmk
 

Batang said:
When posting a question like this you should provide a lot more information i.e.

1. Is this an existing design (product) or you own design.
2. If it is your own design then post the circuit.
3. Also indicate how you are powering the SIM900.

With the above information, helping you would be a lot easier otherwise it is just a guess.

And my guess would be it is a power supply issue.

Cheers.
Click to expand...

yeah..of course..thanks :)
 

For GSM MODULE reset,power capability maybe the problem
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top