+ Post New Thread
Results 1 to 5 of 5
  1. #1
    Newbie level 4
    Points: 555, Level: 5

    Join Date
    Jul 2013
    Posts
    5
    Helped
    0 / 0
    Points
    555
    Level
    5

    Optocoupler with common ground?

    I recently saw a circuit using an optocoupler with a common ground.
    Is there any reason you would want to use an optocoupler this way?
    To me the circuit the circuit looked pointless, same functionality could be achieved using a single transistor.
    Am I missing something here?

    •   Alt6th July 2014, 18:31

      advertising

        
       

  2. #2
    Advanced Member level 5
    Points: 17,382, Level: 31
    crutschow's Avatar
    Join Date
    Feb 2012
    Location
    L.A. USA Zulu -8
    Posts
    3,415
    Helped
    796 / 796
    Points
    17,382
    Level
    31

    Re: Optocoupler with common ground?

    It does seem like there would be no use for a optocoupler with a common ground. Sometimes they are used when someone wants "isolation" not realizing that such a connection does not achieve the desired result. Can you post the circuit?
    Last edited by crutschow; 6th July 2014 at 20:43.
    Zapper
    Curmudgeon Elektroniker



    •   Alt6th July 2014, 20:03

      advertising

        
       

  3. #3
    Newbie level 4
    Points: 555, Level: 5

    Join Date
    Jul 2013
    Posts
    5
    Helped
    0 / 0
    Points
    555
    Level
    5

    Re: Optocoupler with common ground?

    I don't have the circuit, I saw the design from a made PCB.
    The cathode of the led in the optocoupler was shorted with the ground of the micro-controller, and the emitter of the transistor was tied to an I/O pin.



    •   Alt6th July 2014, 20:16

      advertising

        
       

  4. #4
    Advanced Member level 5
    Points: 34,153, Level: 45
    Achievements:
    7 years registered Created Blog entry Created Album pictures
    SunnySkyguy's Avatar
    Join Date
    Sep 2007
    Location
    Richmond Hill, ON, Canada
    Posts
    6,612
    Helped
    1656 / 1656
    Points
    34,153
    Level
    45
    Blog Entries
    7

    Re: Optocoupler with common ground?

    pointless, loss of common mode rejection and HV isolation.
    A good design question lists your overall requirements™ The best question deserves a better answer. ™
    ... Tony Stewart EE since 1975



  5. #5
    Advanced Member level 5
    Points: 12,928, Level: 27
    schmitt trigger's Avatar
    Join Date
    Apr 2013
    Location
    C4E4DEEEDCE6ECD2
    Posts
    2,186
    Helped
    706 / 706
    Points
    12,928
    Level
    27

    Re: Optocoupler with common ground?

    Engineers or designers are people. People make mistakes. This is clearly one of them.

    An optocoupler, specially the cheaper ones, are not very good at transmitting information. Its current gain most times is below unity. The frequency response sucks. Actual output drive is limited.

    The only reason one puts up with the limitations is because of isolation. But if you have common grounds, it is absolutely pointless.



--[[ ]]--