Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[PIC] Proteus and COMPIM problem

Status
Not open for further replies.
L

leo123

Newbie level 4
Joined
Jul 2, 2014
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
32
Hello,

I have Porteus 8.1 and I am using COMPIM to connect my pic , the first time I run the simulation every thing work perfectly , when I stop simulation and run then run the simulation for the second time, the COMPIM will not work . I investigated and the problem seems to be is that even that I stop the simulation the port will not close and so the second time will not be able to reopen the same port . so I have to close and reopen Proteus each time to close the port.

Can somebody help me ?
 

@pjmelect

thanks for help, I tried your software but the problem is the same . seems that the problem is proteus.
at this point I will try to unistall it and then install it again , maybe it will solve the problem.
 

i agree with pjmelect. i have 8.0 and 8.1 version of proteus but i don't find it useful since i'm not using the programming thing there and it's a littlebit buggy. that's why for me 7.10 is still better.

choose only one port in the available 4 ports of proteus and be sure check those ports in device manager that no device are using them for example mouse or keyboards.
 

I solved the problem by installing version 7.10
thanks every body for helping me , seems that version 8 is buggy:cry:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top