Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

cascode and basic current mirror

Status
Not open for further replies.
J

Jalpa Pandya

Newbie level 5
Joined
Jan 20, 2014
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
59
the cascode current mirror circuit designed by me in simelectronics gives me less current as compared to basic current mirror circuit. for basic current mirror w/l ratio = 2/0.18um i get current of nearly 97.5uA. my reference current is 100uA. For cascode current mirror i get current of 98uA at 18/0.18. Can anyone please help me.
 

What is your headroom? The classic cascode needs Vmin=2·Vod+Vth. In addition using minimum L mosfets is bad idea due to channel modulation effects and higher threshold voltage for fets with Lmin.
Check dc OPs, I bet that in cascode CM some of your transistors works in triode region.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top