Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PW9120 6kVA problem with connection.

Status
Not open for further replies.
P

poweraces

Member level 3
Joined
Jan 28, 2013
Messages
61
Helped
7
Reputation
14
Reaction score
7
Trophy points
1,288
Activity points
1,601
Hi Guys

Any one knows where to connected this terminal? this wire is connected from LCD display of the UPS. We lost the marking for this connector. Im not sure if this is connected to body ground or to the heat sink.
IMG_0665.JPG
 

Looks like it's a ground link to a shield around the ribbon cable. If the plug fits that socket underneath it, I would say it goes to the same screw as the green wire.

Brian.
 

Hi Brian

I was think also that way but if i connect it together with the green wire it will create a tension between the black wire and the ribbon cable.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top